Tomura DVR5216-A User Manual Download Page 36 | Manualshive

Page: 36 / 89

Tomura DVR5216-A User Manual Download Page 36

36

User Manual

6. Display/hide status bar: Single click “ ” to hide the status bar, move mouse point to the bottom of interface and single click “ ” to display the status bar.
Press the “Up/ Down” key in remote control or the front panel can also show/hide the status bar.

5. Channel preview order adjust icon: Single click “

” to adjust the order of preview channels.

4. Audio icon: Single click “

” to enable or unable voice.

3. Alarm status icon: Single click “

” to access “alarm status” to query alarm information and clear alarm voice.

2. System login/lock icon: Single click “

” to access host after booting, single click “

” to lock the host.

1. Menu icon: Single click “

” in login status to access the main menu.

7. Quick playback icon: Single click icon “

” to quick playback the before 5 minutes record.

4.1.5 Status Bar

When DVR boot, the status bar at bottom of screen display as below picture:
Operation as below:

4.1.6 Display Output

This series device support source dual output. It means you need choose one video output for seeing the GUI menu and operations. Other source output can only see video output
and OSD, but cannot see the GUI menu operations. The instruction is as below:
1. HDMI,VGA and CVBS will have video output simultaneously.
2. If you select VGA as the display monitor when DVR booting up, then you will see DVR menu operations by VGA or HDMI output monitor. You will can only see video and OSD
on CVBS monitor. If select CVBS, the result is reverse.
3. If you want to switch display monitor, you can realize it by selecting “Display device switch” in right click mouse menu or re-select it in General Setting menu. You can also switch
it by device front panel button or “TV/VGA” button in IR remote controller.
Note: Some series devices do not support CVBS output, specific please in kind prevail!

«
...
34
35
36
37
38
...
»

Summary of Contents for DVR5216-A


























































































Reviews:

No comments