50
TOMTAR MR-S/MR-LG user manual / version 2.0.0 EN
08 INSTRUCTIONS FOR GENERAL USE
PRODUCT LABELLING
Stickers must remain legible and not be re-
moved. Immediately replace illegible or miss-
ing stickers. The serial number sticker is very
important for identifying the product, it is
placed on the product label, which is placed
below the seat on the cross strut. It must not
be removed.
Further markingson the product:
For custom models, which
were customer made for a par-
ticular user, the product label,
intended purpose and warn
-
ings are different. Please pay
attention to the additional
documentation!
Wheelchair crash tested
according to ISO 7176-19 and
suitable for transporting
persons in vehicles/marking of
the attachment points for the
wheelchair restraint system on
the wheelchair
Crash tested according to
ISO 7176-19
Not approved as a seat for
transporting passengers in a
vehicle. Models marked with
these labels have not been
crash tested.
Fig.45
Trademark
Type/model
REF = Item number
UDI = Unique device identifier
(01) UDI-DI / GTIN
(10) Order number
(21) Serial number
Manufacturer/manufacturer's
trademark/contact address
Maximum load capacity/load
Date of manufacture
Maximum safe gradient that
can be driven on with the
wheelchair*
Follow the operating
instructions
Caution- safety information
can be found in the operating
instructions
Medical device
* Depends on the wheelchair settings and
user’s abilities
xxxx-xx
(01)xxxxxxxxxxxxxx
(10)xxxxxxx
(21)xxxxxxxxx
*200059*
xxxxxx
TOMTAR MR-S
xxx kg
xx˚
