32
TOMTAR MR-S/MR-LG user manual / version 2.0.0 EN
05 INDIVIDUAL ADJUSTMENTS
05 INDIVIDUAL ADJUSTMENTS
5.10 Anti-tipping supports (optional)
Only to be performed by specialist staff:
(Fig. 34)
Tool:
Open-end wrench AF 10
Remove the rubber tilting aids to insert the
attachable anti-tipping supports in the lower
rear frame tube (1). The supporting wheels are
attached to the metal tube and secured with a
screw (2).
The height of the wheels can be adapted to the
wheelchair and the anti-tipping supports can be
pushed upwards. This is useful if an accompany-
ing person is pushing the wheelchair and needs
to get past obstacles. To do so, pull the red clamp
bracket towards yourself (3) and push the tube
up or down (4) along the fixture.
3
1
2
4
Then, swap the mounting bracket of the park-
ing brake from one side to the other side and
rotate it horizontally by 180°. (1, Fig. 32).
The assembly retainer (2, Fig. 33) is now posi-
tioned to the rear (180° horizontal). Next,
mount the parking brake on the wheelchair.
Please make sure that the parking brakes are
correct adjusted. (see chapter „Parking
brakes“)
Fig.32
Fig.33
Fig.34
