29
EN
EN
FR
IT
NL
05 INDIVIDUAL ADJUSTMENTS
5.6 Seat height adjustment
Only to be performed by specialist
staff:
The wheelchair is delivered with the seat at a
height of 510 mm. Alternative seat height set-
tings of 485 mm and 460 mm can be selected
using bore holes in the wheel forks and the
wheelchair frame.
Tools:
Allen key size 6 andopen-end wrench
AF 10
Holes to be used in the front wheel fork
(1, Fig. 26).
•
Seat height 51 > Lower bore hole in the wheel forks
•
Seat height 48.5 > Middle bore hole in the wheel forks
•
Seat height 46 > Upper bore hole in the wheel forks
The wheelchair frame has 5 bore holes for seat
height adjustment using the rear wheel adapt-
er (2, Fig. 28). Bore holes provided:
•
Seat height 51 > 2nd + 3rd hole from the bottom
•
Seat height 48.5 > 3rd + 4th hole from the bottom
•
Seat height 46 > 4th + 5th hole from the bottom
To do this, loosen the fastening screws of the
rear wheel adapter (2, Fig. 27) and adjust it to
the desired height. Tighten the screws again.
1
2
WARNING
Altering the seat height means the parking
brakes will have to be readjusted (see
WARNING
Ensure that all screws have been tightened af-
ter the adjustments have been made.
Fig.26
Fig.27
05 INDIVIDUAL ADJUSTMENTS
