27
EN
EN
FR
IT
NL
05 INDIVIDUAL ADJUSTMENTS
5.2 Adjustable backrest
(only TOMTAR MR-LG)
The
TOMTAR
MR-LG is equipped with a Velcro
adjustable backrest as standard. It can be ad-
justed to suit your requirements. (Fig. 21)
To do so, open the back strap’s Velcro fastener
under the seat pad and fold it forwards along
with the backrest upholstery. Now release the
Velcro strap (1). Then you can Velcro (1) the
straps together in the desired position (2). The
Velcro strap must overlap by at least 10 cm.
Start with the lowest strap. Finally, fold the
back strap backwards again and fasten it in
place using the Velcro fastener.
1
2
5.3 Armrests
The length and height of the armrests can be
adjusted. (Fig. 22)
1. From below, loosen the two Phillips screws
with which the armrest is attached to the
side panel. (1)
2.
Adjusting the length (100 mm): Slide the
armrest backwards or forwards using the
threaded inserts provided (adjustable in 25-
mm stages). (2).
3.
Adjusting the height (30 mm): Remove the
armrest and insert one or both height
adapters (15 mm) between the tube of the
side panel and the armrest (3).
4. Attach the armrest with the two Phillips
screws.
1
2
3
Fig.21
Fig.22
05 INDIVIDUAL ADJUSTMENTS
