37
EN
EN
FR
IT
NL
Positioning the calf pads:
1. To adjust the height loosen the 2 hexagonal
screws (1, Fig.43) in the calf pad holder.
2.
Select one of the 2 alternative bore holes,
push the fixture over the hole and fix both
screws at the desired height.
3.
To adjust the depth of the calf pad, loosen
the hexagonal screw (2, Fig. 43) and use one
of the remaining two drill holes to attach it.
1
2
Fig.43
5.18 Accessories and add-ons from external suppliers
In general only original accessories from DIETZ may be used. If third-party products are installed
on the wheelchair, responsibility for the safety of the product passes to the person who installs
the accessories or carries out the installation.
The compliance of the combination of accessories or add-on and product is then new, and must
be declared by the person who attaches it. The compliance declared by DIETZ according to MDR
2017/745, Annex II expires.
WARNING
Should add-ons or accessories that are not sold by DIETZ are used, the safety of the product can
not be guaranteed.
If accessories or add-ons are added to the wheelchair, then the safety instructions in the operating
instructions for the accessories or add-ons must be observed.
