46
TOMTAR MR-S/MR-LG user manual / version 2.0.0 EN
08 INSTRUCTIONS FOR GENERAL USE
What
Description
Pneumatic tyres (optional)
Check for correct function and
damage
•
Check the tyre pressure
•
Pump the tyres up to the required pressure
(see information printed on the side of the tyre).
•
Damaged or worn tyres must be replaced.
In case of air loss, the wheelchair can no longer be
used as safe driving is not ensured.
x
Push handle
Check for correct function and wear
•
The handles must be firmly attached.
•
The push handles must be at the same height and not
show any obvious damage/distortion.
•
It must be possible to lock the fixing screw firmly (for
optional height-adjustable push handles).
x
Side panel, complete
Check for correct function and
damage
•
It must be possible to remove, attach and lock the side
panels without fault.
•
Defects and surface defects must be remedied.
x
Leg rest/foot rest
Check for correct function and
damage
•
It must be possible to remove, attach and lock the leg
rests without fault.
•
Defects and surface defects must be remedied.
x
Push rims
Check for damage and wear
•
The push rims must be firmly screwed to the wheels.
Danger of injury! Surface damage to the push rims
must be remedied immediately.
x
Folding mechanism
Check for smooth movement
•
The wheelchair must fold up soundlessly.
x
Wheels
Check the wheels for correct
function, damage and correct seating
•
The spokes must not be loose, warped or broken.
•
Remove dirt and deposits from the quick-release axles
and wheel hubs.
•
The wheel must not come free if the rear wheel is pulled
to the side.
x
Visual inspection
, check for loose
parts, breaks, corrosion or other
damage
If damage of this type is found, the wheelchair
must no longer be used as safe driving is not
ensured.
x
Cleaning
Check for contamination
•
The entire wheelchair must be cleaned as necessary
depending on the level of contamination but at least
once per month (see chapter Cleaning instructions).
x
Daily / before using
Monthly
