Operation Manual
22
TCP-2000 allows setting colours to any required colour by modification of
red/green/blue compound.
R – RED, G – GREEN, B - BLUE
Warning!!!:
•
Colour modification effect is visible on two square polygons displayed in
bottom right corner of the screen.
•
It is recommended to adjust only RED compound value for the red
polygon (colour mask) and only GREEN compound for the green polygon.
•
Depending on Phoropter setting in the configuration menu, you are
adjusting panel colours for phoropter or colour glasses only.
To adjust colour intensity to the required level select with Arrow up/down button
required colour compound, then press right Arrow to begin edition of the intensity.
To modify colour value use up and down Arrow button. To accept and store the
value press left Arrow.
4.15. Exiting Menu
Select ‘
Exit (ON/OFF)
’ using Arrow Up or Arrow Down button.
1.
Press Right Arrow button to exit Service Menu. TCP-2000 will return to
the last displayed test. Changes implemented will be saved after Chart Panel is
turned off.
2.
You can exit Service mode by simply pressing ‘
ON/OFF’
button. TCP-
2000 will return to the last displayed test. Changes implemented will be saved after
Chart Panel is turned off.
Each time you would like to return to higher level of Configuration Menu please
select „
Exit (ON/OFF)
” and press the right Arrow or at any time
ON/OFF
button.
4.16. Shutdown system
Select ‘
Shutdown system
’ using Arrow Up or Arrow Down button.
1.
Press Right Arrow button to shutdown system.
To restart TCP-2000 simply press any key on the remote control. Time needed for
startup is approximately 30sec.
Summary of Contents for TCP-2000
Page 1: ...USER MANUAL FOR THE TCP 2000 CHART PANEL 40 21122 15 107 02EN Rev 002...
Page 2: ......
Page 50: ...Operation Manual 50...
