4. INSTALLING THE TURBOCHARGER ASSY
Install the turbocharger onto the vehicle using the included parts.
⑦
OIL DRAIN PIPE
⑧
BOLT M6*P1.0 16mm
⑨
OIL RETURN GASKET
⑩
WATER COOLANT PIPE B
⑪ ⑭ WATER BOLT
⑫ ⑮ WASHER M14
⑬
WATER COOLANT PIPE A
⑲
TURBINE OUT GASKET
⑳
TURBINE IN GASKET
㉒
NUT M10*P1.25
A
STOCK BOLT/NUT
TORQUE SPECS.
⑧
4.4N・m (0.45kgm)
※ For 'A', reuse the stock parts
⑪ ⑭ 35N・m (3.6kgm)
※ For MX7960F, use BOLT M6*P1.0 12m (⑯) to
㉒
35N・m (3.6kgm)
attach WATER COOLANT PIPE A to the
※
35N・m (3.6kgm)
compressor housing.
⑰
COMPRESSOR OUT HOSE
⑱
HOSE BAND
※ For GR / GV models using the stock intercooler layout, use the parts above (included)
in place of the stock parts.
※ The above are
not included with MX7960F.
Instead, use the stock gasket and bolts to connect the turbo to the intercooler.
Do not use excessive force when attaching the pipes/tubes to the engine
as this may damage the components and/or engine.
The stock suction hose cannot be used with the MX8265 turbocharger as it features
a Φ60 compressor inlet (larger than stock). Instead, you will need a compatible
TOMEI TURBO SUCTION HOSE (P/N 451002/451004) sold separately.
REF.
PART
NO.
REF.
TORQUE
NO.
REF.
PART
NO.
⑱
⑰
⑦
⑧
⑨
⑩
⑪
⑭
⑮
⑫
⑬
⑲
⑳
㉒
A
A
A
A
34
