INSPECTING/CLEANING THE PIPES
Thoroughly clean/flush the oil inlet pipe.
Then blow the tube clear using compressed air and
check for any rust/blockages.
OIL LINE BANJO BOLT (ENGINE SIDE)
Check which type of oil line banjo bolt is being used on the head.
If the bolt has an orifice, change this for one without,
(SUBARU P/N 14445AA090).
Bolt with orifice
Bolt without an orifice
SUBARU P/N 14445AA090
INSTALLING THE STUD BOLTS
Install the stud bolts (㉑) onto the ARMS TURBOCHARGER.
STUD BOLT ORIENTATION
※ SHORT END TO TURBO
※ Install using the 'double nut' method.
(nuts included)
※ Ensure the stud bolt does not move
when removing the nuts.
Attach 3 stud bolts.
SHOR
LONG
AIR
32
