15
Speed preselection
The speed selector
f
allows to progressively presetting the speed. The required speed de
pends on the type of mixed liquids, it is recommended to perform a
fi eld trial.
Speed selector
The speed selector
e
allows selecting two speed ranges:
Speed 1: 150 min-1 to 300 min-1,
Speed 2: 300 min-1 to 650 min-1
It is possible to switch the speeds when the tool is on. Nevertheless, it is recommended not to
do so with full load.
Electronic control
The electronic control keeps the speed almost constant without and with load. Thus, steady mixing of the liquids is possible.
Electronic protection against overloads.
In the event of extreme overload of the tool, an overload electronic protection protects the motor against damages. In such a
case, the motor stops and only starts again when the load has been reduced.
Heat protection against overloads
· EC directive Machines 98/37/EC;
· EC directive Low tension 73/23/EEC;
· EC directive Electromagnetic compatibility 93/68/EEC
Applied harmonised standards:
· EN 55014-1/A2:2002, EN 55014-2/
A1:2001, EN 61000-3-2:2000, EN 61000-3-
3/A1:2001, EN 60745-2-1:2003
e
WEEE DIRECTIVE
This instrument is covered by the European Directive n°2002/96/CE on Waste Electrical and Electronic Equipment (WEEE Di-
rective). In following this directive, you contribute to the protection of the environement and public health, which would be me-
naced by the incorrect treatment of the waste issued by this instrument. The waste bin symbole on the product indicates that
the instrument should not be disposed of as normal household waste. It should be taken to a waste collection center who is
able to recycle electric and electronic waste. The elimination must be conform to the local reglementation relative to the elimi-
nation of these wastes. For more information concerning the elimination and recycling of this instrument, please contact your
local town authorities, the service of collection of household waste or the sales point where you purchased the instrument.
