11
ENGLISH
SPECIFICATIONS
NEEDED ACCESSORIES
INTRODUCTION
Congratulations on your purchase of the new SWIFT S-1 ARF.
The SWIFT S-1 ARF is a high-quality semi-scale aerobatic glider with a dynamic flight envelope.
It can be flown within in a broad speed range and also in aerobatics. There a various ways of const
-
ructing the model, depending on your preferences.
Therefore the solutions stated in this manual should only be considered as recommendations.
This ARF version (almost ready to fly) requires modeling experience and basic technical knowledge
in construction.
Thus there are different ways to achieve a model with good flight skills.
This is why most alternatives are in fact explained in the manual but not necessary shown in the
pictures.
PLEASE READ THIS MANUAL CAREFULLY BEFORE YOU START ASSEMBLING THE MODEL!
Span
3330 mm
Length
1140 mm
Weight (dry)
3850 g
Wing area
73,2 dm²
Airfoil
NACA mod.
ESC
Doppelstromversorgung
Servos
HR: 1x Savöx 1256 oder Hitec HS-645MG
SR: 1x Savöx 1256 oder Hitec HS-645MG
QR: 2x Savöx 1250 oder Savöx 1260
WK: 2x Savöx 1250 oder Savöx 1260
Servo cables
2x 80cm + 2x 30cm
Battery
2x 2S LiXX 1400mAh
Optional
Schleppkupplung, Fahrwerk
TX
min. 5 Channels
RX
min. 7 Channels
Glues
5min epoxy resin, Loctite
UHU Por, Velcro tape
