5.6 Switching of measurement mode
5-13
■ Applying the read setting
5.6 Switching of measurement mode
You can switch measurement mode. Set a proper mode according to the conditions such as
the number of measurement points, use of dedicated 5-channel switching box, and so on.
For more detail about the measurement mode, refer to the page 8 of Chapter 4, “Measurement
mode”.
1. Move the cursor (reversed indication) with
[▲][▼]
keys on the “Program” screen and
press
[ENT]
key, or press
[5]
of ten keys, to
go to “Measurement mode”.
2. Move the cursor with
[▲][▼]
keys to
select a mode.
3. Press
[ENT]
key. The channel setting
screen of the selected mode is displayed.
2. To apply the read setting, press
[F2]
key.
1. Execute “Reading of TEDS sensor”.
3. Move the cursor to “Ok” with
[
◄][►]
keys, and press
[ENT]
key. The read
setting is reflected (applied) to the
specified channel.
Summary of Contents for TC-32K
