10
５．
Confirmation of the strength of mounting location.
６．
Mounting the Air Winch.
△
！
WARNING;
Mount the winch securely
Make sure the Air Winch Bed and the assembly base is fastened using bolts and
the bolt quantity meets regulation.
Bolt or Nut fastening Torque;
Model
Fastening torque
TAW-300B
25 N･m
TAW-500
40 N･m
TAW-1000
40 N･m
TAW-1500A
40 N･m
TAW-2000
40 N･m
７．
Connecting the Air Winch
△
！
CAUTION;
Before connecting the air hose to the Air Winch, always blow flush the air inlet area.
This will prevent any foreign substances from entering the Air Winch.
△
！
CAUTION;
Before connecting the air hose to the Air Winch, apply about 5 cc Lubrication into the
Inlet port of the Air Winch. This will provide the initial lubrication to the Air Motor.
After the above procedures are completed, attached the air hose to the Air Winch.
△
！
WARNING;
・
Before mounting the air winch, confirm the strength of the mounting location if it
meets the sufficient safety rate to hold the body and rated capacity.
If above condition is not met, do not mount the winch.
Air & Allied Sales (Pacific) Pty Ltd
www.air-allied.com.au
