15
５
. Lifting and lowering load
①
Set the load to the wire rope in a well-balanced position
②
Wind roll with slow speed until the wire rope tightens and stop the winch operation to hold.
③
Check if the load is connected to the wire rope securely and has not slipped.
④
Wind roll a little at slow speed first, then wind roll at the speed needed if there is no
problem.
⑤
Make sure the landing site for the load is stable and safe. Then, lower the load at slow
speed.
６．
Apply the Hand Brake
Although this hoist is equipped with an Automatic brake which is connected to the air motor,
for safety reasons, please apply the hand brake by tightening it clockwise when you stop the
loading operation of the material.
Air & Allied Sales (Pacific) Pty Ltd
www.air-allied.com.au
