toko TMW1003, User Manual

Page: 13 / 56

555004.doc
13
Installing the Access Point Introduction
2 Installing the Access
Point
2.1 Introduction
This chapter describes the physical installation of an Access Point.
2.2 Access Point environment
When you install an Access Point, you must consider the following items:
• Connection to the electricity net.
• Connection to the network.
• Environment of device (heat/humidity): see chapter 5: ‘Technical
specifications 11 Mbps WLAN Access Point’ on page 35 .
• Range of device: see chapter 5: ‘Technical specifications 11 Mbps
WLAN Access Point’ on page 35 .
2.3 Physical installation of the Access Point
n
For best performance, install the antennas on the Access Point in a
vertical position.
Table 2-1 Overview of this chapter.
Section Describes
2.2 Considerations about the physical environment of
an Access Point.
2.3 , 2.4 , 2.5 How to install an Access Point.
2.6 How to connect the Access Point.
2.7 Explanation of the LEDs.
2.8 How to unlock/reset the Access Point.