16
version 1.0
Installing the Access Point
Connecting the Access Point
The wall mount package contains two screws and plugs to fasten the
socket to the wall (see
Figure 2-3: ‘Backside of the Access
Step by step wall mount installation:
1.
Determine the position of the screws. The screws must be 83 mm
apart to fit the keyholes at the back of the Access Point.
2.
Drill holes in the wall at the location of the dots.
3.
Insert the plugs into the holes.
4.
Fasten the screws into the plugs, and leave about 3 mm of space
between wall and screw head.
5.
Attach the Access Point to the screws.
2.6
Connecting the Access Point
Your Access Point is now ready to be connected to the electricity net and
to your network. See
1.4: ‘Adding Access Points to your (network)
on how to add Access Points to your network or
environment.
Figure 2-3
Backside of the Access Point
ト
Summary of Contents for TMW1003
