toko TMW1003, User Manual

Page: 18 / 56

18
version 1.0
Installing the Access Point
LEDs
2.7 LEDs
The Access Point has three LEDs.
Figure 2-5: ‘Access Point LEDs’ on page 18 shows the LEDs.
2.8 Unlocking the Access Point
The unlock/reset button is found underneath to the power connector and
UTP connector. It is a small hole for which you need the end of a
paperclip.
You can unlock the Access Point in order to reconfigure it, or reset it to
the default factory settings.
2.8.1 Unlocking the Access Point to reconfigure
From the Web Interface you can lock the Access Point, prohibiting
configuration changes to it (see section
3.6.8: ‘Security against
unauthorized configuration’ on page 30 ).
Table 2-2 LEDs
LED Function
Power The power LED burns when the Access Point is
connected to the electricity net. See also section
2.6: ‘Connecting the Access Point’ on page 16
Radio signal The radio LED blinks when the Access Point is
active.
Network
connection The network LED burns when the Access Point is
connected to a wired network.
Figure 2-5Access Point LEDs
Radio LED
ト
Network LED
Power LED