8
n
D
IG
IT
A
L
T
O
R
Q
U
E
S
C
R
E
W
D
R
IV
E
R
T
E
S
T
E
R
M
O
D
E
L
T
D
T
3
-G
4-1. Indicator and Operating Parts
4
Names of Parts
(3) Set A-J display (Lower limit value)
(2) Counter display (Upper limit value)
(1) Torque display
(9) Mode key
(7) Clear key
(8) Statistical procssing key
(6) Count backward key
(5) Count forward key
(10) MEMORY/RESET switch
(4)
▼
mark display
(1) Torque display
It displays torque value. It shows in blue when judgement is OK and red when judgement is
either LO or HI.
(2) Counter display (Upper limit value)
It shows the memory counter or the upper limit value.
(3) Set A-J display (Lower limit value)
It shows the limit value registration (Set A-J). It also shows Lower limit value.
(4)
t
mark display
· RUN: RUN mode is selected.
· PEAK: PEAK mode is selected.
· M.R: PEAK mode is selected. (Auto memory/Reset is off.)
RUN mode is selected.
· A.R: PEAK mode is selected. (Auto memory/Reset is on.)
· Unit:
t
appears on the unit (ozf·in, lbf·in, cN·m or kgf·cm) is selected.
(5) Count forward key (
s
key)
It moves the counter forward by one or continuously to read out measured data.
(6) Count backward key (
t
key)
It moves the couter backward by one or continuously to read out measured data.
(7) Clear key (C key)
Use this key in PEAK mode to clear the dislayed data. Use this key in RUN mode for auto
zero adjustment.
