2
n
D
IG
IT
A
L
T
O
R
Q
U
E
S
C
R
E
W
D
R
IV
E
R
T
E
S
T
E
R
M
O
D
E
L
T
D
T
3
-G
(1) Do not put this tester in a place of much moisture or
dust, in a place that is exposed to water or direct
sunlight, or in a place where the humidity or
temperature fluctuates largely.
It may result in electric shock, fire, malfunction,
degradation of performance or failure.
(2) Clean the power plug periodically. Before cleaning,
disconnect the plug from outlet and clean the root of
the plug and the portion between the blades.
Accumulation of dust at the root of the power plug
may cause a short circuit, leading to fire.
(3) If this tester is not to be used for a long time, be sure
to disconnect the power plug from outlet for safety's
sake.
(4) Before moving this tester to another place, be sure to
turn off the power, remove the power plug from
outlet and disconnect all connecting cables. When
moving the tester, avoid shock or vibration to it.
It may damage the power cable or connecting
cables, resulting in fire, electric shock or malfunction.
(5) Do not use this tester to conduct measurements
beyond its capacity.
For safe and efficient operation, use this tester to
measure the torque wrenches suited to the capacity.
Measurement beyond the capacity may cause
accident or damage.
(6) Check for any damaged parts.
Before use, check the tester, accessories and other
parts for damage and make sure that it operates
normally and fulfills the specified functions.
Check the parts and all other portions that may affect
the operation for damage, installation status, etc.
For replacement or repair of damaged parts, contact
your nearest distributor or TOHNICHI MFG. CO.,
LTD.
Caution
For proper and safety use
(1) Source voltage is limited to AC100-240V ±10% range
and it cannot be used beyond this range.
(2) Make sure to use the accompanying AC adapter only.
(3) Do not apply vibration or physical impact on this tester.
(4) Do not use this tester in conditions not specified in
this operating instruction.
(5) Check the functions and settings before use.
(6) Be careful not to expose the product to water or oil
as it may cause malfunction.
(7) Do not drop the product or hit it against other objects
as it may cause product failures.
(8) Do not use the product beyond its capacity specified
in this operating instructions.
(9) This tester is designed to use for torque screwdrivers
only. Do not use it for measuring other products.
(10) Make sure to conduct periodic inspection.
(11) Make sure to conduct zero adjustment before
measuring.
If there should be strange smell or fire on usage,
immediately stop using. Move this instrument to a safe
place and contact TOHNICHI.
Precautions for Use
