• Register lower limit value (A) (default: 0)
Register lower limit value (A) for judgment.
Use
s
key to select digit,
t
key to select number, and STAT key to decide and proceed to
upper limit (B) setting.
(If you push MD key, it proceeds to next without saving. If you push C key, it returns to
measuring display. If the input value is out of the measurable range, it shows “SEtErr” and
automatically returns to upper limit value setting)
In the same way, register upper and lower limit value (B to J).
After registering the lower limit value (J), it returns to the measuring display.
If you want to cancel settings, push C key to return to the measuring display without setting.
6-3 Parameter Settings
• Setting mode
At no load condition, push C => STAT => MD key, then it turns to setting.
• Selecting items to set
Select upper/lower limit or parameter setting.
Use
st
key to change it to “PArA-S” and push MD key or STAT key to proceed to next.
(If you press C key, it returns to measuring display without setting.)
• Auto memory/Reset (default: 0.0)
Using
st
key, set the timing from 0.1 to 5.0 seconds and push STAT key to decide and
proceed to next.
To cancel Auto memory/Reset mode (manual mode), set it to 0.0.
(If you press C key, it returns to measuring display without setting.)
15
n
D
IG
IT
A
L
T
O
R
Q
U
E
S
C
R
E
W
D
R
IV
E
R
T
E
S
T
E
R
M
O
D
E
L
T
D
T
3
-G
