Tohnichi DOTE100N4-G, Operating Instruction

Page: 10 / 28

7
D
IGIT
AL T
ORQUE WRENCH TES
TER
D
O
TE4-G
5-7. Statistical Processing Function, Number of samples, Max-Min-Mean Value
#1 Use ▼/▲ keys and show the last result of the section for statistical processing.
#2 Press “ STAT ” key to show “ Stt ” on display. And use ▼/▲ keys to show the first result of the section.
Press “ STAT ” key and the sampling number “ n ”, maximum value “ HI ”, minimum value “ Lo ” and mean
value “ Av ” in the specified data range are displayed in order.
5-8. Auto Zero Adjustment
With no load on the tester, Auto Zero function is performed automatically by press “ C ” key or turn the
power OFF/ON switch.
“Err9” on display
When loading torque exceeds more than 5% of the tester's maximum torque range, “ Err9 ” is displayed.
When “ Err9 ” is displayed, press “ C ” key with no load on the tester. “ Err9 ” message disappears.
If “ Err9 ” message is still on the display, turn off and on again.
Torque sensor or the electric circuit board may have any problem if “ Err9 ” shows again.
5-9. Over-Torque Alarm
When loading torque exceeds 110% of its maximum torque range, the display flashes as a warning.
5-10. Error Display
DOTE4-G has a self-diagnosis function. When a problem occurs, any of the error messages from Err1
to 9 is displayed.
For any other error messages, refer to "Section #10. Error Message"