Tohnichi DOTE100N4-G, Operating Instruction

Page: 14 / 28

11
D
IGIT
AL T
ORQUE WRENCH TES
TER
D
O
TE4-G
#3 Data length setting
Use ▲/▼ keys and select “ 7bit ” or “ 8bit ”. Press “ STAT ” key to enter and got to next setting,
“Parity Setting”. Press “ MD ” key to skip the setting. Press “ C ” key to go back to the measurement mode.
Factory Default Setting : 8bits
#4 Parity setting
Use ▲/▼ keys and select “ nonE ” for none, “ EVEn ” for even number or “ odd ” for odd number.
Press “ STAT ” key to enter and go back to the measurement mode. Press “ MD ” key to skip the setting.
Press “ C ” key to go back to the measurement mode.
Factory Default Setting : None
Memory mode setting
Set a measured data memory capacity.
“
1000 ”: 1,000 data memory
“ 99 ”: 99 data memory, communication format compatible with previous DOTE3-G model
Factory Default Setting : 1000
Use ▲/▼ keys and select 1000 or 99. Press “ STAT ” key to go confirmation screen.
Press “ MD ” key to skip the setting. Press “ C ” key to go back to the measurement mode.
Press “ STAT ” key to confirm. Memory mode is changed and all stored data is cleared.
When memory mode is changed, existed memory is cleared. Press “
C
” key to go back.
Default setting
Use ▲/▼ keys to select “ dFLt-Y ”. Press “ STAT ” key to r eset to the factory default settings.
Press “ MD ” key to skip the setting. Press “ C ” key to go back to the measurement mode.