ENGINE OPERATION
55
7
1.
Trim rod
Tilt down
1. Release the tilt stopper from the set-
up position while slightly tilting up
outboard motor.
2. Operate the Power Trim & Tilt switch
and tilt the outboard motor down
until the motor touches to the thrust
rod.
The outboard motor can also be tilted up
and down using the switch provided
under the bottom cowl.
It is possible to tilt up or down in spite of
main switch “ON” or “OFF”.
ENOM00940-0
Manual relief valve
If the battery is dead, and the power trim
& tilt switch thus inoperative, open the
manual valve completely in the Manual
direction. This will allow manual tilting of
the outboard motor.
ENOW00872-0
Make sure the manual relief valve is closed
before operating the outboard motor. If the
manual relief valve is not closed, the out-
board motor will tilt up when operated in
reverse.
ENOW00873-0
Before opening the manual relief valve, make
sure nobody is under the outboard motor. If
the outboard motor is in the tilted up posi-
tion, it will tilt down suddenly if the manual
relief valve is loosened in the "Manual"
direction.
1.
Power
2.
Manual
Manual relief valve specified torque:
3 N
-
m (2.2 ft
-
lb, 0.3 kgf
-
m)
1
ENOF02416-0
ENOF02417-0
WARNING
WARNING
1
2
ENOF00679-0
