INSPECTION AND MAINTENANCE
66
10
ENOM00090-0
It is important to inspect and maintain your outboard motor regularly. At each interval
on the chart below, be sure to perform the indicated servicing.
Maintenance intervals should be determined according to the number of hours or num-
ber of months, whichever comes first.
2. Periodic Inspection
Description
Inspection intervals
Inspection procedure
Remarks
First 20
hours of 1
month
Every 50
hours of 3
months
Every 100
hours of 6
months
Every 200
hours of 1
year
Every 400
hours of2
year
Fuel System
Fuel filter
z
/
{
Check and clean or Replace if
necessary. (See page 70)
High pressure
fuel filter
{
Replace
Replace (Every 200 hours or 2
years)
High pressure
fuel hose
z
/
{
z
/
{
Check / Replace if necessary
Fuel tank
z
/
{
z
/
{
Check and clean (See
page 70)
Fuel tank cap
z
/
{
z
/
{
Check/Replace if necessary.
Fuel pump
{
Check/Replace if necessary.
Fuel pressure
{
Check
Hose
z
/
{
z
/
{
Check/Replace if necessary.
Ignition
System
Spark plug
z
Check and clean. (See
page 74)
0.8-0.9 mm
(0.031-0.035 in)
S
park plug cap/High
tension cord
{
{
Check/Replace if necessary.
Starting
System
Starter motor
{
Check
Battery/Cable
connection
{
{
Check
Engine
Engine oil
z
Replace
z
Replace
Replace. (See page 62)
Approx 4200 mL
(4.44 US qt.)
with filter
replacement)
Oil filter
{
Replace
{
Replace
Replace every 200 hrs or 1
years (See page 69)
Oil strainer
{
Check and clean
Valve Clearance
{
Check and adjust
IN:
0.10-0.20 mm
(0.0039 - 0.0079 in)
EX:
0.15-0.25 mm
(0.0059 - 0.0098 in)
Timing belt
{
Check/Replace if necessary.
Compression
pressure
{
Check
Combustion
chamber
{
Clean
Thermostat
{
Check / Replace if necessary
*"
z
" This procedure can be performed by end user.
*"
{
" This procedure shall be carried out by the dealer.
