ENGINE OPERATION
37
7
ENOW00036-0
Be sure to stop engine immediately if cooling
water check port is not discharging water,
and check if cooling water intake is blocked.
Operating engine could lead to overheating
potentially leading to engine damage. Con-
sult an authorized dealer if the cause cannot
be found.
ENOW00974-0
Starter motor will not operate if the stop
switch lock is not properly installed.
This model is provided with start in gear
protection.
ENON00010-0
Note
Start-in-gear protection prevents engine
from starting at other than neutral shift.
In-gear starting of engine will move the
boat immediately, potentially leading to
falling down or causing passenger(s) to be
thrown overboard.
ENOM01806-0
Tiller handle type
1. Be sure to install the stop switch lock
to the stop switch, and attach the
stop switch lanyard securely to the
operator or to the operator's PFD
(Personal Flotation Device.)
1.
1.
Stop switch lock
2.
Main switch key
2. Insert the main switch key.
3. Set the control lever in the Neutral
position.
1.
Shift lever
ENOW00031-0
If the engine starts in gear, do not use it.
Contact an authorized dealer.
4. Set the throttle grip to START posi-
tion.
1.
Throttle grip
5. Turn the main switch key to ON posi-
tion and confirm three warning lamps
light up with buzzer sound and then
go off.
CAUTION
CAUTION
1
2
ENOF00864-1
CAUTION
R
N
F
1
ENOF00865-1
1
ENOF00866-1
