67
OPERATION
During the warm-up period, check
the oil pressure indicator (p. 48),
overheat indicator (p. 49), and
cooling system indicator (p. 49).
If the indicators show any
abnormal condition, immediately
stop the engine and determine the
cause of the problem. Refer to
TAKING CARE OF
UNEXPECTED PROBLEMS
on
p. 115.
6. If the fast idle control was used to
warm-up the engine, gradually
return the control lever to the N
(neutral) position as the engine
warms up.
Station Select Mode
For multiple station type, use the [-]
switch to change the operating
station.
If you press and hold the [-] switch of
the inactive station when all remote
control lever is in the NEUTRAL
position, you can operate the
outboard motors using this station.
A long buzz sounds once and the
ACT indicator comes on when the
station can be operated.
STOPPING THE ENGINE
Emergency Engine Stopping
Flush-Mount Type, Top-Mount
Type (DBW type)
ACT INDICATOR
PRESS and HOLD
[-] SWITCH
EMERGENCY
STOP SWITCH
LANYARD
EMERGENCY
STOP SWITCH
CLIP
