manualshive.com logo in svg

Toastmaster G-24, Owner'S Operating & Installation Manual

Share
Download
Toastmaster G-24 Owner'S Operating & Installation Manual Download Page 33

 
 
SECTION 4 - CLEANING & MAINTENANCE 

B. Cleaning the Oven Chamber

 

Self-Cleaning Mode

 

The G-24 has a self-cleaning mode. Before starting the cleaning process, set the cooktime control to approxi -
mately 12 minutes. To put the oven in the cleaning mode set both the top and bottom heating element 
temperatures to 900°F (482°C). Let the oven run in this mode for approximately one hour. After this hour has 
elapsed, return the cooktime and temperature settings to those desired or turn the unit off. After the oven has 
cooled, any residue remaining in the chamber can be removed by reaching in and wiping out the chamber. Do not 
reach into a hot oven. Severe burns could result. 

CAUTION: 

Be sure oven is off and cool to the touch and the 

conveyor is stopped before attempting to wipe out the 

oven chambers. 

C. Cleaning "Loose" Parts

 

NOTE:

 Commercial oven cleaners can be used to clean stainless steel "loose" parts. 

The following 

items must be removed from the oven to be cleaned manually in the pot sink. 

CAUTION: 

These procedures should be performed  

only when the oven is OFF, cool to the 

touch and the conveyor is stopped. 

Crumb Trays:

 Clean daily. Lift the belt and remove the crumb trays from both entrance and exit end of each 

conveyor. Empty residue, wash, rinse and dry thoroughly. Re-install. 

 

 

30

 

Figure 4-2 

Crumb Trays

 

Summary of Contents for G-24












































Reviews:

No comments

Brands by name

Popular brands

Load more brands