SECTION 2 - INSTALLATION
Figure 2-6
3. Once the ovens are
stacked and secured
check to make sure the
oven(s) are level. Adjust
the legs if necessary.
G. Stacking a single G-24
oven over a Toastmas-
ter CO-19 convection
oven or a Blodgett CTB-
1 convection oven.
NOTE:
A stacking bracket kit (P/N
ACSBG24C019) must be used
for this installation or warranty is
voided.
1. Lay the G-24 on its front
side. Then using the four
bolts supplied with the
bracket, secure bracket to
bottom of oven through the
threaded holes normally
used for legs. Opening in
sidewall must be at right
rear of oven.
Figure 2-7
13
Summary of Contents for G-24
