Toa FV-200 Series, Instruction Manual

Page: 53 / 68

53
1-Channel Broadcasting
Priority broadcast start Priority broadcast end
Priority
Output
B.G.M.
Output
9.2.3. Order of Priority among Priority Broadcasts
Priority broadcasts are not broadcast all at once; rather, they are issued one at a time following a specific
order of priority, as follows.
Lower priority Higher priority
General-purpose
Paging
FV-200EV-AS
Emergency
Message
Microphone
broadcasts from
< < < <
announcements
the RM-200M from the FV-200EV-AS
Example: If the microphone announcements from the FV-200EV-AS is in progress, only that broadcast will
be performed, and other broadcasts will not be made.
[Order of priority among the RM-200M units]
When multiple RM-200M units are connected, the following modes are available for determining broadcast
priority among them. Select the desired mode using the Setting Switch on the rear of the FV-200RF-AS.
Last-in-first-out (LIFO): Priority is given to the RM-200M unit that last selected a broadcast area.
First-in-first-out (FIFO): Priority is given to the RM-200M unit that first selected a broadcast area, and
broadcasts from other RM-200M units are not possible until that broadcast has been finished.
Individual: Priority is given to the RM-200M unit with the lowest address number.
B.G.M.
broadcast
Priority broadcast B.G.M. broadcast
Timer-activated
automatic
broadcasts
B.G.M.
broadcast