8.2. Remote Microphone Settings
8.2.1. DIP Switch Functions
1
2
3
4
5
6
RM-200M side
Switch
Function
Factory-preset
No.
1
Unit ID No. setting
2
3
–
ON
4
Talk key operation
5
–
6
Compression ON/OFF
8.2.2. Unit ID Number Settings (Switch 1 and 2 operation)
To set the unit ID number, use the DIP switches 1 and 2 for the RM-200M.
Note
The DIP switch is located on the side surface for the RM-200M.
Unit ID No.
Switch No. 1
Switch No. 2
1
ON
ON
2
OFF
ON
3
ON
OFF
4
OFF
OFF
8.2.4. Compression Settings (Switch 6 operation)
To perform compression settings, use the DIP switch No. 6 for RM-200M.
Note :
The DIP switch is located on the side surface for the RM-200M. Setting the DIP switch to ON enable
announcements to be broadcast without distortion even if excessive input signal is applied to the
microphone. (Default: ON)
8.2.3. Talk Key Settings (Switch 4 operation)
Set the operating system of the RM-200M's front-mounted Talk key.
Setting the DIP switch 4 located on the RM-200M's side surface to ON enables announcement to be
broadcast while the Talk key is held down. Releasing the Talk key terminates the broadcast. (Press-To-Talk or
PTT mode)
Setting the DIP switch 4 to OFF enables a broadcast to initiate and pressing the key again terminates the
broadcast. (Lock mode)
(Default: ON)
49
Summary of Contents for FV-200 Series
Page 34: ...7 7 RM 200M Connection 34 ...
