8. SETTINGS
8.1.1. DIP Switch Functions
24V, 230mA
ERROR
MICROPHONE RECEIVER PANEL
FV-200RF-AS
ALL 9 7 5 3 1
GND 10 8 6 4 2
ALL 9 7 5 3 1
GND 10 8 6 4 2
ALL 9 7 5 3 1
GND 10 8 6 4 2
ALL 9 7 5 3 1
GND 10 8 6 4 2
ALL 9 7 5 3 1
GND 10 8 6 4 2
ON
1 2 3 4
1 2 3 4
Switch No.
Func on
Factory preset
1
OFF
2
OFF
3
OFF
4
OFF
Priority Setting
Unit Number
Setting
Please set DIP Switch before power supply to unit.
8.1.2. Priority Setting : Last-in-first-out / First-in-first-out / Individual priority
(Default: Last-in-first-out)
Designate priorities among announcements made simultaneously from multiple connected RM-200M
microphones. There are 4 priority setting methods, as follows:
The announcement from the RM-200M last operated takes precedence.
The announcement from the RM-200M first operated takes precedence. Until this announcement is
completed, other RM-200M microphones cannot make broadcasts.
The announcement from the RM-200M assigned a smaller address number takes precedence. The RM-200M
with an address number smaller than that of the RM-200M currently making broadcasts can make
current announcement is completed.
LIFO
FIFO
Indi idual
Not used
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
RM-200RMs. ID 1 > ID 2 > ID 3 > ID 4
8.1.3.
RM-200M Unit Number Setting
(Default: 1)
Set the number of RM-200M units to be connected to the FV-200RF-AS.
1 unit
2 units
3 units
4 units
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
ON
8.1.
FV-200RF-AS Settings
After priority setting change system must be reset to apply new priority setting.
48
Summary of Contents for FV-200 Series
Page 34: ...7 7 RM 200M Connection 34 ...
