18
Spark Plug
Locate the spark plug by parking the scooter on it’s side stand and looking
at the cylinder head from the left side of the scooter.
(See Fig 23)
Pull off the spark plug cap, and remove the spark plug with the spark plug
wrench provided in the tool kit. Insert the spark plug back into the spark
plug cap.
While touching the threads of the spark to the exhaust manifold bolt, turn
on the ignition and crank the engine over with the kick starter.
(See Fig 24)
Note: only turn the ignition key when the plug is grounded. In this
case, touching the exhaust manifold bolt. Failure to do so may result
in electrical damage.
Fig. 23
If the spark appears weak, replace the spark plug.
Check that the gap is 0.035 +/- .002 inches.
Reinstall the spark plug.
Fig. 24
