22
IGNITION MODULE
REPLACEMENT
If the ignition module must be
changed, then use the following
procedure.
1) Park the scooter on it’s side
stand. Remove the center cover
and side panel or seat box to
expose CDI.
2) Remove the screw which holds
the CDI unit in place.
(See Fig. 30)
3) Lift the CDI unit out of the
scooter. (See Fig. 31)
4) Disconnect the wires from the
CDI unit and remove the unit
completely from the scooter.
(See Fig 32)
5) The CDI unit is not repairable.
Exchange the faulty unit with a
new one if required. A new unit
can be installed by reversing the
order of the steps 1 to 4.
Fig. 32
Fig. 30
Fig. 31
