Stop Switch
The Stop switch has two positions:
Stop- Engine stops running.
Run- Engine can run.
Start Button
Turn the key in the ignition
switch to on, hold the rear
brake lever lightly, press the
starter button & the starter
motor will crank the engine.
Release the starter button as
soon as the engine starts.
7
Run
Position
Starter Button
Stop
Position
Rear View Mirror Installation
Screw the installation nut onto the mirror stem
& then screw the mirror stem into the mounting
hole of the handlebar. After the mirror stem is
firmly mounted to the handle bar, tighten the
installation nut with a wrench to prevent the
mirror from turning. Loosen the installation nut
when adjusting the mirror position & retighten
afterwards.
Mirror Adjustment
The side mirrors have two methods of adjust-
ment. They can be adjusted either left & right
or up & down. Use a wrench to loosen the
adjustment nut. (See Fig 1)
While sitting on the scooter, look into the side
mirror and adjust the mirror stem until you see
a clear view of what’s behind the scooter.
Now retighten the adjustment nut.
To adjust the mirrors up & down, locate the
screws which tighten the hand controls on the
handlebars. (See Fig. 2)
Fig. 1
Fig. 2