background image

Warranty Time Period

90 days, or until the center tread is worn to a depth of 3/32" , whichever
occurs first.

Alteration of the odometer so that the actual mileage connot be
determined; alteration may VIOD coverage

Replacement parts refer to Distributors Limited Warranties – Replace-

ment Parts

The Obligation of CMSI Inc

To replace any tire which is proven to be defective in material or factory
workmanship under normal use – until the tire center tread is worn to a
depth of 3/32". At that point, there will be no further warranty consideration,
regardless of the tire’s age or mileage.

Your Obligation

To practice proper tire care and prudent motorcycle operation.  You must
maintain tire inflation pressure and load in accordance with information in the
manual, the tire information label on the motorcycle, and restrictions molded
into the tire sidewalls.
The replacement of a defective  tire under this warranty must be made by an
Authorized CMSI Inc Dealer.

Replacement Charges – up to 50% tread wear

Tire :

No charge for a new direct replacement tire.

Labor : No charge for mounting and balancing – to the tire’s original pur-
chaser if the tire was factory or dealer installed.

You pay for mounting and balancing  - if the tire was sold un-installed.

Replacement Charges – after 50% tread wear

Tire :   50% charge for a new direct replacement tire.
Labor : 50% charge for mounting and balancing.

This Warranty Does Not Cover

Tires installed on non-CMSI Inc vehicles

Tires worn beyond the service limit specified in the appropriate
Owners”  Manual.

Summary of Contents for Venice LX 49cc

































Reviews: