TX7302 Addressable Flashing Beacon Base
Installation & Operation Manual
Address:014
Tone:014
Success
Fail
Tone:014
Fig.16 Tone setting Fig.17
Success to setting Fig.18 Fail to setting
3.5 Read Configuration
Under the main menu, as described in Section 3.2, the configuration parameters of the
Addressable Flashing Beacon Base can be viewed by clicking the button “Read” or “1”, as
shown in Figure 10.
4 General Maintenance
1.
Inform the suitable personnel before conducting the maintenance.
2.
Disable the alarm warning device on the control panel to prevent false alarm.
3.
Do not attempt to repair the circuitry of the alarm warning device, it may affect the
operation to respond to a fire condition and will void the manufacturer’s warranty.
4.
Use a damp cloth to clean the surface.
5.
Notify again proper personnel after conducting the maintenance and make sure to enable
the alarm warning device and confirm if up and running.
6.
Perform the maintenance on semi-annually or depending on the site conditions.
5 Troubleshooting Guide
What you notice
What it means
What to do
Address not enrolling
The wiring is loose
The address is duplicate
Conduct maintenance
Re-Commission the device
Unable to commission
The damage the electronic circuit
Replace the device
Appendix 1
Operational Performance Data for LPCB Approved Tones
4050100452-Rev1.0-0917
TANDA UK
Specifications are subject to change without prior notice
10
