TX7302 Addressable Flashing Beacon Base
Installation & Operation Manual
1 Introduction
1.1 Overview
The TX7302 Addressable Flashing Beacon Base is an alarm warning device used to notify persons in
the vicinity of the occurrence fire emergency in order the person to take appropriate measures. The
unit adopt multi-application device starting from the types, parameters and wiring layout in single
unit. The TX7302 Addressable Flashing Beacon Base is powered by the communication bus. The
TX7302 can change into different encoding modes such as Single-encoding Mode, Dual-encoding
Mode 1 and Dual-encoding Mode 2 using a programming tool.
And it has different starting modes
such as started by a detector, a controller or other front-end linkage. In addition, the alarm tone can
be configured according to the requirement from 17 different tones.
The unit manufactured base on the requirement of EN 54 part 3, European Standard. The unit is
aesthetically pleasing with unobtrusive design that will complement modern building designs and its
plug-in type assembles make installation and maintenance more convenient to the installer. The unit
is compatible to the TX7004 Analogue Intelligent Fire Alarm Control Panel, produced by single
manufacture T&A, to avoid addressable communication compatibility problem.
1.2 Feature and Benefits
•
EN54-3 compliance
•
Built-in MCU processor and digital addressing
•
17 tones Programmable sound output
•
Encoding modes such as Single-encoding Mode, Dual-encoding Mode 1 and Dual-
encoding Mode 2
•
Programmable Evacuate or Pre-alarm/Evacuate signal
•
8 highlights LED status cluster
•
Be started directly by a detector
•
Onsite adjustable parameters
•
Loop power input
•
Aesthetically pleasing design
•
Universal mounting with fix base for simple installation
1.3 Technical Specification
•
Listed
LPCB Pending
•
Compliance
EN54-3
•
Input Voltage
Loop Power: 24VDC [16V to 28V]
•
Current Consumption
Standby:
≤
0.8mA, Alarm:
≤
5mA
•
Protocol/Addressing
T&A, Value range from 1 to 254
•
Address Sequence
Single-encoding Mode: Alarm
Dual-encoding Mode 1:1
st
Alarm / 2
nd
Warning
Dual-encoding Mode 2: 1
st
Warning / 2
nd
Alarm
•
Strobe Light
8 highlights LED
•
Material / Colour
ABS / White glossy finishing
•
Dimension / Height
Diameter 140mm / 59.1mm (with a cover)
•
Weight
198g (with a cover)/180g (without a cover)
•
Class
Type A, Indoors
•
Operating Temperature
-10°C to +55°C
•
Ingress Protection Rating
IP30
•
Humidity
0 to 95% Relative Humidity, Non condensing
2 Installation
4050100452-Rev1.0-0917
TANDA UK
Specifications are subject to change without prior notice
4
