29
5.
Stove Design
Location of main elements of Valerian stove is shown in Fig. 2.
Firebox (7) of the Valerian stove is made of 3-millimetre structural
steel. The stove consists of furnace chamber with convection pipe system
(1) installed around it. The surface of the convection pipes efficiently
transfers heat to the bearer (air) that circulates inside the pipes.
The furnace is covered by the convector panels (8).
The deflector (6) separates the firebox from the flue connection.
The door (2) of the furnace chamber has a window with the translu-
cent screen (3), and sealing along its perimeter (expendable material).
The turning handle of the latching mechanism secures the door in the
closed position by turning the handle down.
When you fire the stove, the secondary air required for burning is
supplied to fuel through the air control valve (4) located at the door. For
fire safety the valve is covered with the deflector (5) from the furnace
side.
By regulating the valve (4), you can force the burning and obtain a
strong high-temperature flame at the moment of firing.
The stove external surface is covered by organosilicon heat-resistant
enamel.
Caution! The manufacturer reserves the right to make changes in stove
construction that do not impair the stove operation quali-
ties, at any time and without updating the supporting
documents.
Combustion gases are transferred to the flue (flue pipe) through the
flue outlet with a diameter of 120 mm, located at the back wall of the
stove.
6.
Marking and packing of the stove
6.1.
Marking
There is an information label indicating the model of the stove, its
mass, factory serial number and date of manufacture of the stove, as well
as information about the certificates for this model.
6.2.
Packaging
The stove is packed in transporting packaging. User manual (in a
plastic bag) and accessories are enclosed in the burning chamber.
