38
dangerous when the door is opened again. Always close the door after
lighting up the stove.
Caution! Do not burn wood in the fuel channel. This can lead to deforma-
tion of the door and fuel channel and the smoking of the
steam room.
Caution! Do not use the stove with open door. It can lead to dangerous
burning modes, smoke exhaust into the heated space and it
can cause fire.
Caution! Forced air blowing into the ash box is prohibited.
Ignite the wood at the top. Add woods to the furnace in small
batches. During ignition the firebox is to be filled with medium and
finely chopped wood. The larger pieces of wood should be put in the
bottom layer, the smaller pieces - in the top layer. Put chips on the top of
the wood for ignition. The furnace should be filled up to 2/3 maximum.
It takes some time for the stable draft to appear after the stove is lit
up. That is why when you open the door of the recently lit stove,
operating in set temperature, a slight output of smoke in the room is
possible to appear.
Further intake regulation, which affects combustion intensity, is
done by opening and closing the ash box. You should find how to regulate
the ash box correctly by experimental way.
To load a batch of wood, open the damper gate (not included into
delivery package) and close the valve of the door (in this order only);
slowly open the top door in a few seconds.
Be careful not to extinguish the fire while loading additional fuel.
To complete the stove operation, wait until the fuel is completely
burnt and then clean the stove from the ash, close the doors, the valve at
the bottom door, and the damper.
Caution! It is forbidden to flood the fire with water.
Caution! Never use a stove if its flue is damaged!
Caution! Usage of firewood with moisture level of 20% and higher leads
to higher scaling and excessive smoking.
Caution! During operation of the stove, slight deformation of the metal in
the stove is possible, which does not violate the tightness of
the welds - this is not the sign of reject.
