ProPlex IQ One+ Mini User Manual v1.1 – 30112020
11
The drawing below depicts the completed installation of the Single-Unit Small RackMount Kit. These rack ears are
designed to be symmetrical, so that the short and long ears can be mounted to either side of the chassis.
The following drawing depicts the completed installation of the Dual-unit Small RackMount Kit. This configuration
requires the TWO center Dual Joiners (included in the Kit), attached at the front and rear of the units, enhancing
stability in the rack.
INSTALLING
THE
DUAL
JOINERS
The Dual-unit Small RackMount Kit will include FOUR
joining links and FOUR countersunk flat head screws. These
links are designed to nest into each other and are secured
with the included screws and threaded holes.
Each link piece is identical. Simply rotate the joining link
and line up the installation holes to install on either the left
or right side of the corresponding unit.
