TKH KEYPROCESSOR Orion, Installation Instructions Manual

Page: 20 / 67

20
Connector: I Description
A kpBus (RS485)
B kpBus (RS485)
C GND (digital ground), for data use only.
S kpSensor
Reader & IO-2
Connector: J Description Connector: K Description
C GND (digital ground) A4 Monitored input 4
T2 Digital input (Override card reader) A5 Monitored input 5
LD Card reader LED operation A6 Monitored input 6
D0 DO/Data or Digital input C GND (digital ground)
D1 D1/Clock or Digital input H2 High Power output 2
O4 Digital output 4 C GND (digital ground)
C GND (digital ground) O5 Digital output 5
+V Power feed card reader O6 Digital output 6
Connector: L Description
PRT2 Communication port
NOTE
the Orion must not be connected directly to the network. Doing so may result in
severe damage to the device, including loss of functions.
6.5 Status LED
With the RGB LED, the current mode of the Orion can be determined at a single glance. The
Orion’s status LED is described in the below table:
Port D
Colour of the LED Description
Light blue Bootloader : Connecting to iProtect <Checking MD5>
Blue Bootloader : Starting
Blue Bootloader : Programming firmware (Or violet)
Pink Bootloader : No valid application to start
Pink Application : Format SD card
Orange Application : Checking SD card (initialisation)
Green Application : Calamity mode
Red Application : When using no SD card, the LED will flash red if the
device cannot communicate with the network controller.
Red Application : If the LED displays a solid red light, the Orion has
detected a surge or short circuit. This also means that the Orion is
not communicating with the network controller.
Orange Application : If the LED displays a solid amber light, the Orion has
detected a surge or short circuit, but is nevertheless
communicating with the network controller.
Green Application : The LED will display a solid green light when the
Orion is communicating with the network controller and no input
or output anomalies are detected.
Green
Application : If the location buzzer of the Orion is activated, the
green status LED will flash fast.