6.
Mount the CEDD
®
Cable into the cable connector (E). Use a Pozidriv PZ2 screwdriver to fasten the
wires in the connector.
E
CEDD
®
Power out
Pin 1 - CEDD
®
cable 1
Pin 2 - empty
Pin 3 - CEDD
®
cable 2
7.
Connect the CEDD
®
cable to the CEDD
®
power out port of the CEDD
®
HPS Basestation. Make sure
that the red clips are pressed towards the CEDD
®
HPS Basestation, to lock the cable connector.
8.
Remount the bottom panel: Attach the protective earth wire (1) and mount the bottom panel by
fastening the two screws at the front (2) using a Phillips PH2 screwdriver.
9.
Fixate cables: Use strain reliefs to fasten the cables with a little overlength between the strain relief
and the CEDD
®
HPS Basestation cabinet.
Installation and Maintenance Manual - CEDD
®
HPS Basestation
©
TKH Airport Solutions 2022. All rights reserved. All specifications subject to change without notice.
25
