![background image](http://html1.mh-extra.com/html/tivoli-audio/trace/trace_installation-instructions-manual_1120422005.webp)
www.tivolilighting.com tel: 714-957-6101 fax: 714-427-3458
RGBW TRACE™ Horizontal Installation Instructions
7101009
Page 5 of 8
Copyright © 2020 Tivoli 06.23.20
Trace RGBW Mounting Options (Continued)
Bending direction for Trace™ Horizontal
Tape Light
X
Straight Channel for Trace™RGBW Horizontal Installation
Step 1:
Prepare Straight Mounting Channel for installation cutting it
to the correct length, keeping in mind that the End Caps will not fit
inside the Channel, and by drilling screw holes 3” from each end and
additional holes approximately every 18” along the channel.
Step 2:
Place Straight Channel on the mounting surface and mark
the hole locations.
Step 3:
Remove the Channel and drill pilot holes at all hole locations.
Step 4:
Place the Channel into position and secure with screws (not
included).
Note:
Screws should be appropriate for the mounting location.
(ie: wood screws for wood, etc.)
Step 5:
Spray dry lubricant on a rag and wipe along the inside upper
surfaces of the extrusion. We recommend using a dry spray lubricant,
such as 3M Spray Lubricant or WD-40 Specialist for all Trace™
installations to insure the luminaire fits into the channel without
damage.
Step 6:
Trace™ must be installed with two people. One to press
the luminaire into the channel and the other to hold the spool and
unroll it while keeping the Trace™ flex body straight.
Step 7:
Start by orienting the Trace™ with the Lens facing away from
the Channel, as shown.
Step 8: IMPORTANT!
Insert the Trace™ body into the Channel. Start
at one end and and press it down carefully and gradually, working
along the Channel, inserting the Trace™ body along the channel until
the entire Trace™ fixture is securely mounted in the channel.
WARNING!
Risk of Product Damage.
Do not hammer or pound the luminaire into the channel. Once
inserted, do not pull or yank on the fixture. Trace™ will be damaged if
it is not handled carefully.
Step 9:
Connect to power.
Bending Limitations
Warning!
Risk of Product Damage.
Trace™ RGBW Horizontal can only be bent in the direction that does
not twist the Tape Light.
Screws
(by others)
Straight
Channel