![background image](http://html1.mh-extra.com/html/tivoli-audio/trace/trace_installation-instructions-manual_1120422004.webp)
www.tivolilighting.com tel: 714-957-6101 fax: 714-427-3458
RGBW TRACE™ Horizontal Installation Instructions
7101009
Page 4 of 8
Copyright © 2020 Tivoli 06.23.20
Horizontal
Notched
Channel
Bending direction for Trace Vertical
Tape Light
Screws
(by others)
Trace RGBW Mounting Options (Continued)
Install Trace™ Horizontal in Notched Mounting Channel
Warning:
Risk of Product Damage.
Only bend the Trace™ Horizontal so the lens bends side to side so as
not to twist the Tape Light. See diagram.
Note:
Minimum bending diameter for the notched channel is 11”.
However, the minimum bending diameter for Trace™ Horizontal is 2”
in the horizontal direction only.
Step 1:
Determine Channel mounting Location.
Step 2:
Drill a hole 3” from each end of the Channel and 18”-24”
along length of Channel.
Step 3:
Position the Notched Channel and attach with screws
(Included).
Step 4:
Spray dry lubricant on a rag and wipe along the inside upper
surfaces of the extrusion. We recommend using a dry spray lubricant,
such as 3M Spray Lubricant or WD-40 Specialist for all Trace™
installations to insure the luminaire fits into the channel without
damage.
Step 5:
Start by orienting the Trace™ with the Lens facing away from
the Channel, as shown.
Step 6:
Trace™ must be installed with two people. One to press
the luminaire into the channel and the other to hold the spool and
unroll it while keeping the Trace™ flex body straight.
Step 7:
Insert the Trace™ body into the Channel one flex section at a
time. Start at one end and and press it down carefully and gradually,
working along the Channel, inserting the Trace™ body into each
section until the entire Trace™ fixture is securely mounted in the
channel.
WARNING!
Risk of Product Damage.
Do not hammer or pound the luminaire into the channel. Once
inserted, do not pull or yank on the fixture. Trace™ will be damaged
unless it is handled carefully.
Step 8:
Connect to power.
Bending Limitations
Warning!
Risk of Product Damage.
Trace™ RGBW Horizontal can only be bent in the direction that does
not twist the Tape Light.
X