9
Safety instructions
The operator may only carry out the maintenance and repair work
described in these operating instructions
Maintenance and service work not described in these operating instruc-
tions may only be carried out by trained specialists following instruction by
TITGEMEYER on the basis of the service instructions which also exist.
See the address on Page 34 for more information on service instructions
and training.
Note
The manufacturer accepts no liability for damage resulting from
incorrect repairs or the use of spare parts from other sources
At the time of leaving the workplace, do not leave the riveting tool with
pressure on.
A guarantee is void, if any repair work carried out on the riveting tool has
lead to any damage of the riveting tool.
The riveting tool MS 60 has been checked and manufactured according to
European guidelines. The declaration of conformity can be found on the
second last page.
In addition to this, the riveting tool has been checked by the TÜV Product
Service GmbH, Hannover, and certified with a GS-mark.
Maintenance and servicing
Service instructions
Guarantee
Declaration of conformity
GS-checked
