11
10
9
9
11
14
Preparing the riveting tool
The components ordered by you are marked as per the checklist found
inside the packing.
Note
Please check the contents of the packing, for completeness of
the checklist
In every case, please carry out a visual check of the riveting tool before
starting any work:
— for external damages,
— for oil leakage from the riveting tool.
• Remove the plug (10) from the connection port, and store in the original
packing.
Note
The swivel joint (11) and the safety valve (9) can be alternative-
ly fitted on both the sides of the hydraulic housing. The diagram
below shows the arrangement for a right-hander
Note
In case of all screw-fittings, observe the table for torque values
on page 25 of the chapter “Maintaining the riveting tool”
• Screw on the swivel joint (11) and tighten using the wrench SW17 (see
page 25 “Table for torque values”).
Package insert
