background image

2

PISTON SEAL LUBRICANT
Specially formulated to prevent
materials from adhering to the piston
rod, which becomes abrasive to the
upper seals.  Piston Lube will break
down any material that may
accumulate in the wet cup and keep it
from drying.

8 oz individual     

700-925

1 qt individual 

700-926

8 oz, case of 12      

700-911

1 qt,  case of 12

700-912

AIRLESS HOSE
I.D.x Length                     Product No.
1/4" x 50'

316-505

3/8" x 50'

690-375-50

3/16" x 15'

550-221

HIGH PRESSURE SWIVELS
Pressure Rated at 5000 psi

Gun-to-Hose
1/4” NPS (F) x 1/4” NPS (M) 500-428

Hose-to-Hose
1/4” NPS (M) x 1/4” NPS (M)  500-424

FITTINGS
1/4" x 1/4" Hose Coupling 490-012
1/4" x 3/8" Hose Coupling 490-016
3/8" x 3/8" Hose Coupling 490-014
T-Fittings, 1/4" X 1/4"

490-036

4 Gun Manifold

500-056

Tip Filter Retainer

520-046

1/4" Mx1/4"F Swivel Union 490-005
1/4" Mx3/8"F Swivel Union 490-032
Retaining Nut Adapter

490-007

High Pressure Fl. Gauge

730-394

Parts Drawings &

Repair Information  15-25

Frame.................................................. 15
Replacement Labels............................ 16
Engine................................................ 18
Maintenance........................................ 19
Gear Box.............................................. 20
Clutch Rotor & Gear Repair................. 21
On/Off Switch ...................................... 21
Filter Block........................................... 22
Pressure Switch................................... 23
Prime Relief Valve............................... 23
Filter Replacement............................... 23
Fluid Section........................................ 24
Syphon Assembly................................ 24
Pump Repair........................................ 25
Equipment Job History.........................26
Specifications...................................... 28
Warranty.............................................. 28

Table of Contents

Accessories

2

General Repairs/Service

3

Maintenance/Service Record

4

Warnings

5

Aviso (En Español)

6

Attention (En Français)

7

Notice: Fire or Explosion Hazards    8 & 9
Start-up Procedure                        10, 11
Application Techniques

12

Cleaning Procedure

13

Airless Tip Selection

13

Flushing Specifications

14

Troubleshooting                             13, 14

Spray Pattern
Airless Gun
Airless Pump

Accessories

LIQUID SHIELD
Cleans and protects spray systems
against rust, corrosion and premature
wear.

Case of 12 (1 quart bottles)    700-888
1 quart                                    700-889

690HPG

U.S. Patents: #3,936,002; 4,220286;
4,508268; 4,611,758; 4,744571;
4,768,932; 4,755,638; 4,768929;
4,840,543; 4,908,538; 5,425,506

WARNING:

 The Engine Exhaust 

from this product contains chemicals 
known to the State of California to 
cause cancer, birth defects, or other 
reproductive harm.

Summary of Contents for 755-095





















Reviews: