© Titan Tool. All rights reserved.
5
English
IMPORTANT: Make sure the siphon tube is firmly inserted into
the inlet fitting, past the O-ring as shown below. If the tube is
not fully inserted, a seal will not be achieved and the pump will
not prime. DO NOT insert the notched end of the suction tube
into the inlet fitting.
NOTE: The siphon tube should go into the inlet
approximately 3/4” in order to be fully inserted.
~3/4” (19 mm)
Siphon
tube
Inlet fitting
O-ring
Incorrect
Correct
6. If desired, attach the siphon filter at the notched end of the
siphon tube (the larger tube). The filter will prevent any debris
in the spray material from getting into the pump.
Siphon tube
Notch
Siphon filter
7. Make sure the electrical service is 120V, 15 amp minimum.
8. Plug the turbine power cord into a properly grounded outlet
at least 25’ from the spray area.
Connecting the Material Hose
1. Thread the end of the fluid hose onto the Transfer Pump fluid
outlet and tighten with a wrench.
2. Thread the other end of the material hose onto the spray gun
inlet and tighten with a wrench.
Outlet valve
Fluid hose
Fluid hose
Spray gun
Inlet
Hose Configurations
Spraying without whip hoses
Follow the configuration below if you want to spray without the fluid
and air whip accessories.
Air hose
Fluid
hose
Straps
NOTE: When strapping the hoses together, start at the spray
gun and work your way back.
NOTE: 30 ft fluid hose - included with Transfer Pump
30 ft air hose - included with turbine (25 ft air hose
included with CS75)
Hose straps - included with Transfer Pump
Spraying with whip hoses
Follow the configuration below if:
1. You already have the air whip hose and you purchased a fluid
whip hose kit.
2. You have purchased both the fluid whip hose kit and the air
hose whip kit.
Air hose
Fluid hose
Fluid whip
hose
Air whip
hose
Straps
Move
coup
ling
NOTE: When strapping the hoses together, start at the
spray gun and work your way back.
NOTE: 30 ft fluid hose - included with Transfer Pump
30 ft air hose - included with turbine
5 ft air whip hose - included with the CS105 and
CS115
5 ft fluid whip hose - sold separately.
