TPM 054
Version 1.0, May 30, 2016
Page | 3
INTRODUCTION
Configuration Utility Manual
SAFETY
The product must be installed and operated in accordance with Titan manuals, application notes, and all
other relevant publications. Only qualified personnel familiar with the installation and operation of this
equipment should install, adjust, operate, or service this equipment.
Observe all federal, state/provincial and local safety standards and industry recommended practices.
This manual will use the following standard safety terms and conventions to indicate conditions:
WARNING
Indicates a hazardous situation which, if not avoided, could result in death or serious
injury.
CAUTION
Indicates a hazardous situation which, if not avoided, could result in moderate injury
and/or property damage.
NOTE
Indicates an important message not related to personal injury or property damage.
RADIO FREQUENCY (RF) SAFETY
Notice regarding Compliance with FCC and Industry Canada Requirements for RF Exposure
The antenna intended for use with this unit meets the requirements for mobile operating configurations
and for fixed mounted operations, as defined in 2.1091 of the FCC rules for satisfying RF exposure
compliance.
Compliance of the device with the FCC and IC rules regarding RF Exposure was established and is given
with the maximum antenna gain as specified above for a minimum distance of 20 cm (8 in) between the
devices radiating structures (the antenna) and the body of users.
